This article explains how to open the connection details drawer and what information it contains.

01/ Introduction

Clicking any row in the connections table opens a connection details drawer on the right side of the screen. The drawer gives you a full view of that connection, including organisation information, labels, and data sharing settings.

The drawer is also where individual actions such as adding labels, managing data sharing, and cancelling a connection are performed.

02/ Prerequisites

Anyone with platform access can view the connection details drawer; however, some actions within the drawer (cancelling a connection, editing data sharing) require admin access.

03/ Steps

1. Go to your Organisation Profile and open the Connections tab.
2. Click any row in the connections table.

3. The connection details drawer opens from the right side of the screen. It shows:

   • Connected organisation name and type

   • Gateway Organisation ID

   • Initiated by (Sent or Received)

   • Connected since (date the connection became active)

   
    

4. To close the drawer, click the ✕ button in the top-right corner of the drawer, or click anywhere on the page behind it.

04/ Cancelling a connection from the drawer

Admin only: You can cancel an active connection directly from the drawer.

1. Open the connection details drawer for the connection you want to cancel.
2. Click Cancel connection at the bottom of the drawer.
3. Confirm the action in the confirmation prompt.

Note: Cancelling a connection is permanent. All data sharing stops immediately. To reconnect, the other organisation will need to send a new connection request.

05/ Tips & Notes

Tip: The drawer also contains your labels and data sharing settings for this connection. Scroll down within the drawer to see these sections.