This FAQ answers the most common questions brands and vendors have about the Data Hub, including supplier information, report availability, downloads, exports and data sharing.
No. The green Valid until date indicates when the supplier's subscription for that module expires. It does not indicate how long the report is valid.
The report date is displayed above the subscription status.
It means the supplier currently has no valid subscription for that module. Reports that the supplier previously published remain visible.
There are several possible reasons:
- No active connection: The supplier's connection may be pending or disconnected. Check Brand Module > Connections.
- Filters: A filter may be hiding the supplier. The latest report date filter initially covers the last 12 months. Select an earlier From date to include older reports.
- Search not applied: If you changed the search criteria or filters, click Search to apply them.
- Organisation type: If the organisation is a vendor, check the Vendors page.
This depends on the module:
- InCheck: The supplier has not yet published an InCheck Report.
- ClearStream: The supplier has not yet accepted the laboratory results.
Reports become visible once the supplier publishes or accepts them.
These download options are greyed out when the supplier does not share the relevant data with your organisation.
Only the supplier can update these permissions in their own Connections page.
The InCheck and ClearStream reports themselves remain available.
The blue pill indicates that the supplier allows RCA/CAP data to be shared. However, an RCA/CAP is available only when the supplier has submitted one for the selected report.
Yes. You can download:
- The latest report using the download icon in the supplier table.
- Any available report using the ⋮ menu in the supplier side panel.
No. The supplier table does not have checkboxes for selecting individual suppliers.
The Export function uses the filters you apply. To export the latest report for one supplier, search for that supplier in the Export panel.
No. The export includes only the latest report for each matching supplier.
To download older reports, open the supplier side panel and select the reports you need.
You can find your export in Available downloads, at the top right of the Supplier Overview.
Export files remain available for 7 days. After this period, you will need to start a new export.
Try starting the export again. If the export still does not change to Ready, contact ZDHC Customer Support.
Not yet. ClearStream reports are currently unavailable through the Export function or the side-panel download option for several reports.
You can still download ClearStream reports individually from the supplier table or side panel.
Not yet. The ClearStream CSV (parameters) contains one row per tested parameter, rather than one row per report.
Measured values, units and limits are available in the ClearStream PDF.
The ClearStream CSV (parameters) contains scores and evaluations for each parameter, but not the measured values, units or limits.
Not currently. You can download reports and data in PDF or CSV format.
You can open CSV files in Microsoft Excel. When importing the file, select Semicolon (;) as the separator.
Verified InCheck is part of the Data Hub scope, but Verified InCheck data is not yet available in the Data Hub.
Verified InCheck Reports are available as PDFs only. There is no Verified InCheck CSV.
Yes. If your organisation is registered as a vendor, the Data Hub has the same layout and functionality as the Data Hub available to brands.
The supplier controls data-sharing permissions for each connection.
On their own Connections page, under Data Sharing Permissions, suppliers decide whether to share their Chemical Inventory and wastewater data, including RCA/CAP.
If you have further questions or need assistance, contact ZDHC Customer Support through the ZDHC Gateway.