This article explains what the Data Hub shows, how to open it, and how to read a supplier row. It helps brand and vendor users see the latest reports for their connected suppliers.
01/ What's Changed
If you used the previous Data Hub: The previous Data Hub showed one row per report, so one supplier could fill many rows. The new Data Hub, launched in November 2026, shows one row per supplier, with the latest InCheck and ClearStream Report and the subscription status. The supplier's full report history is in the supplier side panel, and you can bulk download again using the Export button.
02/ Introduction
The Data Hub gives you one overview of all your connected suppliers. For each supplier, the Data Hub shows the location, your own tags, what the supplier shares with you, and the date of the latest InCheck and ClearStream Report. From the Data Hub, you can download reports one by one, several reports from one supplier at once, or the latest reports for an entire group of suppliers.
The Data Hub has two pages: Suppliers and Vendors. Each page lists only that type of connection. If your organisation is a vendor, your Data Hub looks and works the same as a brand's Data Hub.
03/ What suppliers share with you
You always see a connected supplier's InCheck and ClearStream Reports. Two types of data depend on what the supplier shares with you:
- Chemical Inventory (CI): the product list behind the supplier's InCheck reports.
- RCA/CAP: the root cause analysis and corrective action plan for ClearStream.
Only the supplier can change these settings on their Connections page under Data Sharing Permissions.
Report IDs
| Report | ID starts with | What it is |
|---|---|---|
| InCheck | 40- | Monthly report on the supplier's chemical inventory, checked against the ZDHC MRSL. |
| ClearStream | 60- | Wastewater and sludge test report. |
| Verified InCheck | 48- | The InCheck result checked on site by an approved verifier. |
Organisation IDs, such as the ID below a supplier name, start with 01-.
04/ Prerequisites
- You have a ZDHC Gateway account for a brand or vendor organisation.
- You have at least one active connection with a supplier. You manage connections in Brand Module > Connections.
05/ Steps
- Click Brand Module in the main menu at the top of the page.
- Click Data Hub in the menu on the left. The Data Hub menu opens and shows Suppliers and Vendors.
Click Suppliers. The Supplier Overview page opens, with one row per connected supplier.
Find the Export and Available downloads buttons at the top right of the Supplier Overview. You use these buttons to export reports for many suppliers and to collect the export files.
Read a supplier row from left to right. The table below explains each column.
Column What it shows Supplier The supplier name and organisation ID. Location The country of the supplier. Tags Your own connection labels from Connections. A dash means the connection has no labels. Data sharing Two pills: CI (Chemical Inventory) and RCA/CAP. A blue pill means the supplier shares that data with you. A grey pill means the supplier does not share that data with you. InCheck, ClearStream The date of the latest report with a download icon, or No report. Below the date is the subscription status: Valid until with a date, in green, or No subscription in red. - Click Vendors in the menu on the left to see your connected vendors. The Vendors page has its own search box.
06/ Tips & Notes
Notes:
- The green Valid until date is the end date of the supplier's subscription for that module. The Valid until date says nothing about how long the report is valid. The report date is the date shown above the subscription status.
- Suppliers with a pending or disconnected connection show No active connection. You can't open these suppliers in the Data Hub.