A facility may have multiple wastewater discharge routes or discharge points, and these may fall under different discharge types defined in the ZDHC Wastewater & Sludge Guidelines.
The applicable discharge types are:
Direct discharge
Indirect discharge with pretreatment (with sludge)
Indirect discharge without pretreatment
Indirect discharge with pretreatment (without sludge)
Zero liquid discharge (ZLD)
Reporting discharge type
If a facility has more than one discharge type, it should use a risk-based approach to select the discharge type that represents the highest environmental risk among its applicable discharge routes.
For reporting purposes, the discharge types should be considered in the following order, from higher to lower environmental risk:
Direct discharge
Indirect discharge with pretreatment (with sludge)
Indirect discharge without pretreatment
Indirect discharge with pretreatment (without sludge)
Zero liquid discharge (ZLD)
This approach ensures that the reporting reflects the discharge route with the greatest potential environmental impact rather than the discharge route handling the largest percentage of the facility's wastewater.
The selection of the reporting discharge type should not be determined solely by:
the percentage of wastewater associated with each discharge route;
the treatment technology or treatment efficiency;
the quantity of wastewater treated;
the percentage of wastewater recycled or reused;
the type or capacity of the treatment system.
Instead, where multiple discharge types are present, the facility should identify all applicable discharge routes and select the highest-risk discharge type according to the hierarchy above.
Example
A facility has two different wastewater discharge routes: A facility reuses 50% of wastewater and 50% is indirectly discharged to CETP with pretreatment (with sludge). The facility should report: Indirect discharge with pretreatment (with sludge)
This is because the reporting approach is based on the relative environmental risk of the applicable discharge types, rather than the percentage of wastewater managed through each route.