This guide will show you how to upload unverified Wastewater Test Reports in ZDHC Gateway as a supplier.

01/ Single Upload

To add a test report, follow the steps below.

1. Click WATERDATA on the left navigation.
2. Click Unverified Lab Tests.
3. Click  on the upper right to add a test.
   
   
4. Fill out the required fields.
   Note: Fields with an asterisk (*) are required information.
   Note: Once you have selected the supplier, the ZDHC ID will automatically be filled.
5. Fill out additional fields.
6. Click  to open a sample location’s test results. (Optional)
   
7. Click SAVE.
   
   

Step result: The test is added in the Waterdata Test list.

02/ Bulk Upload 

To upload in bulk, follow the steps below.

1. Click WATERDATA on the left navigation.
2. Click Unverified Lab Tests.
   
3. Click  on the upper right to upload by bulk.
   You will be redirected to Lab Analysis Bulk Upload
4. Click Download Template.
   
5. Fill out the downloaded template.
   Note: Make sure to complete all fields. It is important that the unit, parameter, and substance names are one of those specified in ZDHC Wastewater Guideline. If you use your own name or the names are misspelled, it can cause an error during upload.
6. Upload files.
   Note: Make sure to upload a Lab File in CSV or Excel format.
   Note: Make sure to upload a lab report in PDF.
7. Click UPLOAD NOW.
   Note: Gateway validates the uploaded results. If an error is found, you have to resolve the error to continue the upload.
   
   You can now view the status of the uploaded file on the List of Uploaded Lab Results. If successful, you can view the uploaded file in the Unverified Waterdata Test list.